Online certificate course for Oregon EFDAs

Subgingival Retraction Cord Placement

Learn to place cord for your dentist’s crown and bridge cases, online and at your own pace, with no day off work.

$299one-time
6 months of access from purchase

100% online and self-paced. No class day, no travel, no time off work.

Enrollment opens soon. Join the waitlist and we’ll email you the day it opens.

Cross-section of a tooth prepared for a crown. On the left, the gum tissue rests over the sulcus and the prep margin. On the right, retraction cord is packed into the sulcus just below the margin.Prep marginSulcusRetractioncordGingivaBone
Retraction cord packed into the sulcus, just below the prep margin.

What you’ll be able to do

Place retraction cord for your dentist

Under OAR 818-042-0090, an Oregon EFDA who completes a course of instruction approved by the Board may place retraction cord subgingivally.

By the end of the course, you can

  • Place retraction cord subgingivally with single- and double-cord technique
  • Find the margin and read the sulcus around it
  • Work with retraction materials, instruments, mirror and fulcrum
  • Check the medical history and follow infection control and OSHA standards
  • Recognize complications and chart the placement

How the rule works chairside

  1. Your dentist authorizes it and is on the premises.

  2. You place the retraction cord subgingivally.

  3. A licensee (a dentist, dental hygienist or dental therapist) checks the placement before the patient is dismissed.

Read OAR 818-042-0090

How it works

Learn online. Show the skill at your office.

6 steps from checkout to certificate. The coursework fits around your schedule, and the hands-on part happens with your own dentist.

Online, at your own pace

  1. Enroll

    Check out online. Your supervising dentist signs a short agreement in Module 0.

  2. Complete the online modules

    About 7 hours of coursework, at your own pace, any time in your 6 months of access.

  3. Pass the final exam

    If you don’t pass in two attempts, you’ll have a review with the instructor.

    • 25 questions
    • 80% to pass
    • 2 attempts
  4. Submit your typodont check-off video

    Record your check-off on a typodont or extracted teeth and send it in for instructor review.

At your office, with your dentist

  1. Place cord on 10 patients

    At your own office, under your dentist’s supervision, logged on the course forms.

  2. Get your Certificate of Completion

    Issued by the Board-approved instructor. Keep it on file at your office.

There’s nothing to file with the Board and no state fee.

What’s inside

About 7 hours of coursework

Narrated lessons from Dr. Smith, short animations and 8 interactive simulations, with knowledge checks in each module.

About 7 hours of coursework. The Board requires at least 6.

Also included

  • Module knowledge checks
  • Two homework assignments
  • Printable chairside forms

What the modules cover

  1. Oregon rules and supervision
  2. Medical history
  3. Infection control and OSHA
  4. The sulcus and margin anatomy
  5. Retraction materials
  6. Instruments, mirror and fulcrum
  7. Single- and double-cord technique
  8. Complications and charting

8 interactive simulations

  • Allowed or Not?
  • Chart Review
  • Label the Periodontium
  • Margin Finder
  • Cord Drawer
  • Mirror Drill
  • Pack the Cord
  • What Went Wrong?

See inside the course

Practice it on screen before you do it chairside

Screenshots from the course itself: the interactive simulations you work through and the narrated lessons from Dr. Smith.

Interactive simulations

  • The Pack the Cord simulation on step 8 of 18, “Start between the teeth”: top and side views of a crown prep on tooth #30 with an instrument tucking cord into the sulcus between the teeth.
    Pack the CordWalk through single-cord technique on #30, one step at a time.
  • A Margin Finder question about a crown prep on tooth #15: facial and side views with the gum edge marked, and four answer choices: equigingival, subgingival, can’t tell from this view, and supragingival.
    Margin FinderRead the margin on a crown prep before any cord goes in.
  • The Cord Drawer simulation showing a dentist’s order for tooth #30 above a drawer of twisted, braided and knitted cord, sizes #000 to #3, and medicaments, with “Ask the dentist” options below.
    Cord DrawerFill the dentist’s order: construction, size and medicament.
  • A Mirror Drill rep: the mirror view of tooth #3 with a lifted section of cord highlighted, next to the direct view where the learner taps the spot for the instrument tip.
    Mirror DrillWork in the mirror: find where the instrument tip goes.
  • The What Went Wrong? complication guide open to “Cord popping out”: a side view of cord floating up out of the sulcus, with what you see, the likely cause, the next step and how to prevent it.
    What Went Wrong?Learn what you’ll see, the likely cause and the next step.

Narrated lessons

  • A lesson slide showing the crown appointment in order: anesthesia and preparation by the dentist, cord placed by you, then impression or scan, and fibers checked before the dentist’s check.
    Where cord fits in a crown appointmentNarrated lesson, Module 1: Oregon rules and your role.
  • A lesson slide with three illustrated cross-sections of cord in the sulcus labeled right fit, too big and too small, above the reminder “Never fix the wrong size with more force. Stop and reassess.”
    Reading the tissue while you packNarrated lesson, Module 5: Retraction materials.
  • A lesson slide showing an example chart note for cord placement with tooth, cord, technique, medicament, time in place, tissue and bleeding, and who placed and checked it.
    Documentation: what goes in the noteNarrated lesson, Module 8: Complications and charting.

Swipe to see more.

Online vs. in person

Skip the class day

In-person courses in Oregon typically run $350–$375, plus a day off work. This one is $299 and fits around your schedule.

Join the waitlist

This course

Online

$299

one-time, 6 months of access

  • Self-paced
  • No class day
  • No travel
  • No time off work

Typical in-person course

$350–$375

course fee in Oregon

  • Plus a day off work

Who it’s for

For the assistant, and for the office

For EFDAs

You want to prep crown and bridge cases and be more valuable to your office.

  • Learn on your schedule, with no class day and no time off work
  • Do the hands-on part at your own office, with your own dentist
  • Keep your certificate on file; no renewal is required

For dentists and office managers

One $299 course lets your assistant pack cord while you move to the next chair.

  • Your office can pay with its card at checkout
  • You sign a short agreement in Module 0, then supervise and sign off 10 patients
  • Nothing to file with the Board and no state fee

Your instructor

Ryan Smith, DDS

Portrait of Dr. Ryan Smith
  • Oregon-licensed dentist
  • Oregon Board of Dentistry–approved instructor for placing material subgingivally

Dr. Ryan Smith is a practicing dentist and co-owner of Accelerated Assisting. He teaches in the program and hires dental assistants for his own practices, which shapes what the twelve weeks focus on.

In this course, Dr. Smith narrates the lessons, reviews your typodont check-off video and issues your Certificate of Completion.

More about Dr. Smith
Gloved trainees practice working together beside a dental chair.
Accelerated Assisting’s dental assisting school: putting clinical skills into practice at the dental chair.

Before you enroll

You need both of these.

  • A current Oregon EFDA certificate
  • A job in a dental office whose Oregon-licensed dentist agrees to supervise and sign off your 10 patients

You’ll also need

  • A typodont or extracted teeth for the check-off video
  • Patients at your office for your 10 supervised placements

Questions

Before you check out

Anything else? Email Admissions@AcceleratedAssisting.com.

Can this really be done online?

The rule requires a Board-approved course of instruction. This course is taught by an Oregon Board of Dentistry–approved instructor and covers every topic in the Board’s course outline. The hands-on part happens at your office, with your dentist.

How long does it take?

About 7 hours of coursework at your own pace, then your 10 patients. You have 6 months of access from purchase.

What if I don’t pass the exam?

You get two attempts at the final exam (25 questions, 80% to pass). After that, you’ll have a review with the instructor.

What do I need?

A typodont or extracted teeth for the check-off video, and patients at your office for your 10 supervised placements.

Does the certificate expire?

No renewal is required.

Can my office pay?

Yes. An office can pay with its card at checkout.

Online certificate course for Oregon EFDAs

Ready to add cord placement to your chairside skills?

100% online and self-paced. No class day, no travel, no time off work. An office can pay with its card at checkout.

  • $299 one-time, 6 months of access
  • About 7 hours of coursework, at your pace
  • 10 supervised patients at your own office
  • A Certificate of Completion for your office’s files